Installing Intake-Air Distributor

Information 

Replace sealing rings, seals and O-rings.

1. Replace seals -2-  on the intake-air distributor -1-  .
2. Install intake-air distributor -1-  .
   Fig 1: Identifying Intake-Air Distributor

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Tighten screws -1 to 8-  according to the specified tightening sequence. Tightening torque 10 Nm (7.5 ftlb.) 
   Fig 2: Intake-Air Distributor Tightening Sequence

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Further installation is performed in reverse order.