LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4 Edition >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 24 - Fuel System - Electronic Ignition -- PANAMERA (970) >> WM 244019 Removing And Installing Fuel Injector (LP) (PANAMERA, PANAMERA 4) >> Subsequent Work

Subsequent Work

  1. Clean remaining fuel from the high-pressure system before starting the leak test.
  2. Fit fuel collection pipe. → Installing Fuel Collection Pipe 
  3. Perform a leak test on the high-pressure system. → WM 243001 CHECKING FUEL COLLECTION PIPE FOR LEAKS 
  4. Fit intake-air distributor. → Installing Intake-Air Distributor 
  5. Connect the battery.
  6. Perform a test drive. Make sure the high-pressure pipes and threaded joints are sealed properly (visual inspection with engine running).
  7. Read out engine control unit fault memory after completing the work and print log. Compare with the previous log.
scientia non olet · About LEMON Manuals