Installing Air-Cleaner Element

Insert air-cleaner element -1- into the housing.

Fig 1: Identifying Air-Cleaner Element
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit air cleaner housing cover -1- .
1. 2.1. Screw in and tighten three Torx screws -2- .
  → Tightening torque: 10 Nm (7.5 ftlb.)
  
  Fig 2: Identifying Air Cleaner Housing Cover
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit air guide under the air cleaner housing.
1. 3.1. Fit air guide -1- .
2. 3.2. Close the clips -2- .
  
  Fig 3: Identifying Air Guide Of Air Cleaner Housing
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.