Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Cardan shaft | to final drive | Initial tightening | 30 Nm (22 ftlb.) | ||
| Cardan shaft | to final drive | Torque angle | 90° | ||
| Cardan shaft | to transmission | Initial tightening | 50 Nm (37 ftlb.) | ||
| Cardan shaft | to transmission | Torque angle | 90° | ||
| Cardan shaft center bearing | to body | Tightening torque | 20 Nm (15 ftlb.) |