Installing Front Window Lifter (Guide Rail)
- Install guide rail.
- 1.1. Remove remaining pieces of rivets using a wet and dry vacuum cleaner NT 561 ECO WE 1231
.
- 1.2. Place guide rail -1-
in installation position -arrow-
on the door sub-frame.
- 1.3. Fit complete guide rail -1-
in place using new rivets -2 and 3-
.
- 1.4. Rivet in the guide rail -1-
at the top fastening point using new rivets -2 and 3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Rivet in the guide rail -1-
at the bottom and center fastening points using new rivets -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.