Removing Rear Window Guide

Information 

• The molding will be damaged when the top clips are removed. 

Fig 1: Identifying Clips On Molding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Drill out fastening rivets -1-  at the top and remove the remaining pieces of the rivets.
   Fig 2: Drilling Fastening Rivets

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Pull seal on molding off the B-pillar cover at the rear.
   Fig 3: Pulling Seal On Molding B-Pillar Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Pull front window guide out of the B-pillar cover.
   Fig 4: Pulling Window Guide Of B-Pillar Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Remove the side window.
   1. 4.1. Unclip retaining clips on molding -A-  .
   2. 4.2. Pull window guide out of the side window -B-  .
   Fig 5: Pulling Window Guide Of Side Window
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   3. 4.3. Unscrew fastening screws -2-  .
      Fig 6: Pulling Window Guide Fastening Screws

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   4. 4.4. Lift up the molding -A-  .
   5. 4.5. Swivel out the side window -B-  .
   6. 4.6. Remove guide pin -C-  and side window.
   Fig 7: Swivelling Out Side Window
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Drill out fastening rivets -1-  on molding and remove the remaining pieces of the rivets.
   Fig 8: Drilling Fastening Rivets

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Remove the molding.