LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4 Edition >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> 74 - Seat UPHOLSTERIES, Cover -- PANAMERA (970) >> WM 741319 Removing And Installing Cover For Front Seat (Except PANAMERA Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Subsequent Work >> Removing Creases In Seat Cover (Leather)

Removing Creases In Seat Cover (Leather)

NOTE: Risk of damage to cover if excessive heat is applied.
  • Creases in cover

→ If creases have formed, only short partial warming with the hot-air gun is permissible.

→ The hot-air temperature of 50 °C must always be observed.

  1. If creases have formed, partially heat the affected areas of the cover with the hot-air gun and smooth out the cover using the special tools.

    Wetting-off iron 9747 

    Knurling iron 9747/1 

    Bone burnisher 9747/2 

    Hot-air blower v.a.g 1416 

scientia non olet · About LEMON Manuals