Repair Restrictions
- Tears and cuts in low-stressed components (e.g. dashboard, trim panels) up to around 50 mm long can be repaired.
- Tears and cuts in more heavily stressed components (e.g. seats) up to around 20 mm long can be repaired.
- Holes in low-stressed components (e.g. dashboard, trim panels) up to around 20 mm in diameter can be repaired.
- Holes in more heavily stressed components (e.g. seats) up to around 10 mm in diameter can be repaired.
- Damage in the area of a seam cannot be repaired.
- Alcantara leather cannot be repaired.
- Here too, the skills and experience of the worker are crucial for a good repair result.