LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4 Edition >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> 70 - Linings, Insulation -- PANAMERA (970) >> WM 705819 Removing And Installing Dashboard Molding On Passenger's Side (Except PANAMERA Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Removing Molding For Cupholder At The Front Left And Right

Removing Molding For Cupholder At The Front Left And Right

  1. Insert a screwdriver between the cupholder -7-  and left -3-  and right molding -5-  .
    Fig 1: Unclipping Molding At Left And Right
    G09812277Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Carefully unclip molding at the left and right.
scientia non olet · About LEMON Manuals