LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera 4 Edition >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> 70 - Linings, Insulation -- PANAMERA (970) >> WM 705819 Removing And Installing Dashboard Molding On Passenger's Side (Except PANAMERA Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Removing Molding For Cupholder At The Front Centre

Removing Molding For Cupholder At The Front Centre

  1. Insert a screwdriver between the cupholder -7-  and center molding -4-  .
    Fig 1: Unclipping Center Molding
    G09812278Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Carefully unclip center molding.
scientia non olet · About LEMON Manuals