Removing Wiper Arm For Rear Window Washer
WARNING:
Electrically moved components
- Danger of limbs being trapped or severed
→ Switch off electric power to drive motor.
→ Make sure it does not switch on again.
→ Check that there is no electric charge.
Information
Move the wiper arm to its end position (horizontal position) before removing it.
- Switch off ignition.
- Remove ignition key.
- Remove cap -1- .
- Loosen fastening nut -2- .
- Fit the pole terminal puller 60 x 40 Nr.99 on the nut -1- and pull the wiper arm -2- off the wiper linkage.
- Remove the pole terminal puller and screw fastening nut -1- down fully.
- Remove wiper arm -2- .