Purge Valve Hose Bungs
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
A leaking (not closing fully) purge valve is identified in the Pinpoint Tests by performing the test routine with a bung installed in the purge hose.
BUNG SIZES SPECIFICATION
| MODEL | BLANKING TOOL |
|---|---|
| XF (X250) | 9.89mm male |
| XF (X260) | 9.89mm male |
| XJ (X351) | 9.89mm male |
| XK (X150) | 9.89mm male |
| F-Type (X152) | 9.89mm male |
| LR2 (L359) | 7.89mm female |
| LR3/LR4 (L319) | 9.89mm female |
| Evoque (L538) | 7.89mm female |
| Range Rover (L322) | 9.89mm male |
| Range Rover (L405) | 9.89mm male |
| Range Rover Sport (L320) | 9.89mm female |
| Range Rover Sport (L494) | 7.89mm male/9.89mm male |