Preparing Bonding Surfaces
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The table below shows how to use cleaners, primers and activators when preparing the bonding surface .
Tools and materials - Porsche double-cartridge window adhesive
| Preparing car windows for installation | ||
|---|---|---|
| Old glass | New glass | |
| with preliminary coat (durable primer) | ||
| Cut back adhesive bead ↓ | -cleaner- ↓ | |
| Clean rim (ceramic layer with durable primer) ↓ | ||
| Old glass | New glass | |
| with preliminary coat (durable primer) | ||
| -activator- ↓ | -primer- ↓ | |
| Activate adhesive bead (only necessary after idle times > 24 h) | Apply primer from the adhesive kit over the durable primer on the spare part ↓ | |
| Apply adhesive | ||
| Install glass | ||
| Prepare car window flange for installation | ||
|---|---|---|
| Old flange (old paintwork) | New flange (new paintwork) | |
| Cut back adhesive bead ↓ | -cleaner- ↓ | |
| Clean flange surface ↓ | ||
| -activator- ↓ | -primer- ↓ | |
| Activate adhesive bead (only necessary after idle times > 24 h) ↓ | Prime flange surface ↓ | |
| Apply adhesive | ||
| Install glass | ||