LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (6X Body-Equipment Outside - General -- (95B) MACAN) >> WM 6X00IN Technical Values (Except MACAN Sport Edition) >> Technical Values >> Overview

Technical Values: Overview

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Glass sunroof motor to glass sunroof frame Internal Torx screw, M5 x 28, replace Tightening torque 2 Nm (1.5 ftlb.)    
Sun blind motor to glass sunroof frame Internal Torx screw, M5 x 28, replace Tightening torque 2 Nm (1.5 ftlb.)    
Fastening screw for bracket   Tightening torque 8 Nm (6 ftlb.)    
G11984302

Removing bracket 
Fastening screws for roof assembly Observe specified tightening sequence Tightening torque 8 Nm (6 ftlb.)    
G11984303

Installing roof assembly 
Securing roof assembly to body   Diameter 8 mm (6 ftlb.)    
G11984304

Positioning roof assembly 
Fastening screw for sliding- roof panel   Tightening torque 7 Nm (5 ftlb.)    
G11984305

Removing front panel 
Fastening screw for rear sliding-roof panel   Tightening torque 7 Nm (5 ftlb.)    
G11984306

Removing rear panel 
Fastening screw for roll-up sunblind   Tightening torque 2.5 Nm (2 ftlb.)    
G11984307

Removing guide 
Front apron to inner lock carrier   Tightening torque 8 Nm (6 ftlb.)    
Front apron to outer lock carrier   Tightening torque 8 Nm (6 ftlb.)    
Front apron to front retaining strip   Tightening torque 2 Nm (1.5 ftlb.)    
Front apron to lower lock carrier   Tightening torque 2 Nm (1.5 ftlb.)    
Front apron to side lock carrier   Tightening torque 2 Nm (1.5 ftlb.)    
Rear panel to underbody Item 1 Tightening torque 2 Nm (1.5 ftlb.)    
Rear apron to rear retaining strip Item 1 Tightening torque 2 Nm (1.5 ftlb.)    
Rear apron to wing Item 2 Tightening torque 2 Nm (1.5 ftlb.)    
Guide pin for tailgate Item 2 Tightening torque 10 Nm (7.5 ftlb.)    
Fastening screws securing bumper to body Item 1 Tightening torque 40 Nm (30 ftlb.)    
G11984308

Bumper mounting 
Retaining strip to lock carrier Screw Tightening torque 9.7 Nm (7.5 ftlb.)    
Retaining strip to lock carrier Screw Tightening torque 9.7 Nm (7.5 ftlb.)    
Retaining strip to body Collar nut Tightening torque 9.7 Nm (7.5 ftlb.)    
Retaining strip to body Collar nut Tightening torque 9.7 Nm (7.5 ftlb.)    
Bumper to front carrier   Tightening torque 20 Nm (15 ftlb.)    
Carrier to body Tapping screw Tightening torque 4.5 Nm (3.25 ftlb.)    
Carrier to body   Tightening torque 55 Nm (41 ftlb.)    
Rear power window motor to rear door Internal Torx screw, Ø 5 x 22 Tightening torque 3.3 Nm (2 ftlb.)    
Front power window motor to front door Internal Torx screw, Ø 5 x 22 Tightening torque 3.3 Nm (2 ftlb.)    
Fastening nut for side window   Tightening torque 6 Nm (4.5 ftlb.)    
G11984309

Side window mounting 
Fastening nut for power windows   Tightening torque 7.5 Nm (5.5 ftlb.)    
G11984310

Removing power windows mechanism 
Fastening nut for rear window lifter   Tightening torque 7.5 Nm (5.5 ftlb.)    
G11984311

Removing power windows mechanism 
Fastening screw for rear spoiler Item 3 Tightening torque 6 Nm (4.5 ftlb.)    
G11984312

Loosening rear spoiler 
Fastening nut for rear spoiler Item 2 Tightening torque 6 Nm (4.5 ftlb.)    
G11984313

Loosening rear spoiler 
Wheel cover to rear apron Tapping screw Tightening torque 2 Nm (1.5 ftlb.)    
Fastening nut on door entry guard bracket Item 1 Tightening torque 6 Nm (4.5 ftlb.)    
G11984314

Support rail for door entry guard 
Fastening nut on bracket for rear step Item 1 Tightening torque 6 Nm (4.5 ftlb.)    
G11984315

Bracket for rear step 
Fastening nut on bracket for front step Item 1 Tightening torque 6 Nm (4.5 ftlb.)    
G11984316

Bracket for front step 
Fastening screw securing step to underbody Item 1 Tightening torque 2.5 Nm (2 ftlb.)    
G11984317

Bottom of step 
Fastening screws for door entry guard   Tightening torque 2.5 Nm (2 ftlb.)    
G11984318

Door entry guard mounting 
Upper part of housing to bracket   Tightening torque 1.4 Nm (1 ftlb.)    
Bracket to mirror base   Tightening torque 20 Nm (15 ftlb.)    
Cover to mirror base   Tightening torque 0.9 Nm (0.5 ftlb.)    
Rotary plate to cover   Tightening torque 5 Nm (3.5 ftlb.) +/-0.1 Nm (+/-0.1 ftlb.)  
Cover to mirror base   Tightening torque 20 Nm (15 ftlb.)    
Adjusting motor to bracket   Tightening torque 1.7 Nm (1.5 ftlb.)    
Adjusting motor to bracket   Tightening torque 1.4 Nm (1 ftlb.)    
Rear-view mirror to door   Tightening torque 23 Nm (17 ftlb.)    
Cover to front door Tapping screw Tightening torque 2.5 Nm (2 ftlb.)    
Cover to rear door Tapping screw Tightening torque 2.5 Nm (2 ftlb.)    
Cover to rear of rear door   Tightening torque 2.5 Nm (2 ftlb.)    
Glove compartment to dashboard   Tightening torque 3 Nm (2 ftlb.)    
Grab handle to body   Tightening torque 5.6 Nm (4 ftlb.)    
Front door sill trim to body   Tightening torque 2.5 Nm (2 ftlb.)    
Rear door sill trim to body   Tightening torque 5.6 Nm (4 ftlb.)    
Ashtray to centre console cover   Tightening torque 1.5 Nm (1 ftlb.)    
Trim panel to dashboard   Tightening torque 4 Nm (3 ftlb.)    
Centre console to selector support   Tightening torque 8 Nm (6 ftlb.)    
Centre console to cardan tunnel   Tightening torque 20 Nm (15 ftlb.)    
Threaded connection between oddments tray cover and centre console   Tightening torque 4 Nm (3 ftlb.)    
Fastening screw for fire extinguisher holder Item 1 Tightening torque 8 Nm (6 ftlb.) Nm (+/-0.5 ftlb.)  
G11984319

Installing tray 
Sun blind to door panel   Tightening torque 2.3 Nm (1.5 ftlb.)    
Airbag to dashboard   Tightening torque 9 Nm (6.5 ftlb.)    
Airbag bracket to dashboard bracket   Tightening torque 4.5 Nm (3 ftlb.)    
Belt guide clip to body   Tightening torque 20 Nm (15 ftlb.)    
Pedestrian protection to lock carrier, upper Tapping screw Tightening torque 4.5 Nm (3.5 ftlb.)    
Pedestrian protection to lock carrier, lower Tapping screw Tightening torque 3 Nm (2 ftlb.)    
Fastening screws for trailer hitch   Tightening torque 50 Nm (37 ftlb.)    
Fastening screws for trailer hitch   Torque angle 90°    
Fastening screw securing sash guide cover to adjustment fitting   Tightening torque 50 Nm (37 ftlb.)    
G11984320

Sash guide cover on 
Fastening screw securing seat-belt pretensioner to B-pillar Item 1 Tightening torque 50 Nm (37 ftlb.)    
G11984321

Removing seat-belt pretensioner 
Fastening screw securing adjustment fitting to B-pillar Item 2 Tightening torque 20 Nm (15 ftlb.)    
G11984322

Installing adjustment fitting 
Fastening screw securing front belt lock to seat Item 3 Tightening torque 50 Nm (37 ftlb.)    
G11984323

Installing seat-belt buckle 
Fastening screw securing belt guide to B-pillar Item 1 Tightening torque 4.5 Nm (3 ftlb.)    
G11984324

Removing belt guide 
Fastening screw for rear belt lock   Tightening torque 50 Nm (37 ftlb.)    
G11984325

Loosening seat-belt buckle 
Fastening screw securing seat-belt pretensioner to bodyshell Item 3 Tightening torque 50 Nm (37 ftlb.)    
G11984326

Installing seat-belt pretensioner 
Fastening screw securing seat belt mount to bodyshell   Tightening torque 50 Nm (37 ftlb.)    
G11984327

Securing seat belt mount 
Fastening screw securing centre rear seat belt mount to body Item 1 Tightening torque 50 Nm (37 ftlb.)    
G11984328

Loosening centre seat belt mount from body 
Fastening nut for centre rear seat-belt pretensioner Item 1 Tightening torque 50 Nm (37 ftlb.)    
G11984329

Installing seat-belt pretensioner 
Centre bearing for sun visor on body   Tightening torque 5 Nm (3.5 ftlb.)    
Fastening screw securing cupholder to oddments tray   Tightening torque 1.5 Nm (1 ftlb.)    
scientia non olet · About LEMON Manuals