LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (94 Lights, Lamps, Switches, Exterior -- (95B) MACAN) >> WM 945819 Removing And Installing Light Bulb Igniter (Except MACAN Sport Edition) >> Installing Light Bulb Igniter

Installing Light Bulb Igniter

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Always comply with the regulations for handling ESD-sensitive components!
  • Always wear approved work clothes and shoes when carrying out assembly work  .
  • Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation  .
  • Do not touch electric pins and plug contacts  .
  1. Check the condition of the seal -1-  and check that it is fitted correctly on the light bulb igniter -2-  .
  2. Connect electric plug connections -3- on the light bulb igniter until they engage securely.
    G11984690

    Connecting electric plug connections 

  3. Carefully insert light bulb igniter -1-  into the headlight.
  4. Tighten fastening screws -2-  .
    G11984691

    Installing light bulb igniter 

scientia non olet · About LEMON Manuals