LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 628 (46 Brakes - Brake Mechanism -- (95B) MACAN) >> WM 465002 Checking Front Brake Discs (Wear Assessment) (Except MACAN Sport Edition) >> Checking >> Checking Lateral Runout (Brake Disc/Wheel Hub) And Thickness Tolerance >> Brake Disc Lateral Runout

Brake Disc Lateral Runout

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel → 440519 REMOVING AND INSTALLING WHEEL
  2. Adapter plate 9510/2  must be fitted and tightened to tightening torque 160 Nm (118 ftlb.). → Adapter plate on wheel hub 
    G11977593

    Adapter plate on wheel hub 

  3. Fit adapter dial gauge set with ball joint arm Nr.147-1  at a suitable position on the wheel bearing housing. → Dial gauge on brake disc (shown as an example) 
    G11977594

    Dial gauge on brake disc (shown as an example) 

  4. Fit the dial gauge with some preload and measure the lateral runout at the greatest external diameter of the brake disc.
scientia non olet · About LEMON Manuals