LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (10 - Engine - Crankcase, Suspension -- (95B) MACAN) >> WM 105519 Removing And Installing Oil Separator (MACAN Only) >> Installing Oil Separator

Installing Oil Separator

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit oil separator. Replace seal. 
  2. Secure oil separator.
    1. 2.1. Screw in screws by hand and tighten one after the other. Tightening torque 9 Nm (6.5 ftlb.) 
    Fig 1: Oil Separator Screws Tightening Sequence
    G11980300Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals