LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (10 - Engine - Crankcase, Suspension -- (95B) MACAN) >> WM 103719 Removing And Installing Torque Support (All Model Except For MACAN & MACAN Edition) >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Torque support to body and cylinder head cover   Final tightening 180°    
Torque support to body and cylinder head cover Always use new aluminium screws Initial tightening 20 Nm (15 ftlb.)    
scientia non olet · About LEMON Manuals