LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 625 (13 - Engine - CRANKGEAR, Pistons -- (95B) MACAN) >> WM 136019 Removing And Installing Flywheel (MACAN Only) >> Removing Flywheel

Removing Flywheel

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The flywheel must not be tilted during removal and installation. 
  1. Secure the extractor Extractor T40176  on the flywheel -A-  with a nut -B-  .
    G11980349

    Extractor 

  2. Remove flywheel.
    1. 2.1. Turn extractor Extractor T40176  upwards.
    2. 2.2. Pull flywheel off the input shaft without tilting it.
    G11980350

    Flywheel 

scientia non olet · About LEMON Manuals