Technical Values
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing transmission to engine | M12 x 125 | Initial tightening | 30 Nm (22 ftlb.) | ||
| Fastening screw securing transmission to engine | M12 x 100 x 90 | Final tightening | +105° | +/-30° | |
| Intermediate steering shaft to steering gear (universal joint) | M8 x 30 thread/always use new screw or bolt following removal | Tightening torque | 30 Nm (22 ftlb.) |