Removing Selector Knob
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not apply lateral forces to the pull rod as it could break off.
Do not use force on the pull rod
- Turn locking mechanism at the bottom of the shift lever boot 45 degrees in -direction of arrow A-
and release selector knob by pulling it up in -direction of arrow B-
.
Releasing selector knob
- Pull selector knob -2-
up slightly, position assembly wedge on selector knob cover -1-
and -3-
and unclip carefully.
Removing selector knob
- Pull off selector knob with selector knob cover.