LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (74 Seat Cushions, Seat Covers -- (95B) MACAN) >> WM 741619 Removing And Installing Suction Fan For Backrest Surface (Except MACAN Sport Edition) >> Removing Suction Fan For Backrest Surface

Removing Suction Fan For Backrest Surface

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Detach cover for rear backrest at the top -arrow-  .
    G11982056

    Disengaging cover 

  2. Unplug electric plug connection for suction fan -arrows-  .
    G11982057

    Unplugging connector for suction fan 

  3. Remove fastenings for suction fan.
    G11982058

    Expansion rivets 

    1. 3.1. Press plastic pins -1-  through the expansion rivets -2-  using a suitable mandrel.
    2. 3.2. Remove expansion rivets -2-  by pulling them towards the rear.
  4. Pull suction fan -1-  out of the rubber flange (air guide) -2-  (-arrow-  ) and remove it by pulling it towards the rear.
G11982059

Removing suction fan 

scientia non olet · About LEMON Manuals