Test adapter mounting instructions
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The test adapter 9616 must be used for all tests on electrical wiring (e.g. convertible-top control module connectors/micro-switches/potentiometers).
It does not damage the plug-in (miniature) contacts and facilitates location of the individual pins.
Use test adapter 9636 in conjunction with test adapter 9616 and pin template 9636.
Disconnect the vehicle wiring harness from the convertible-top control module.
Connect test adapter 9636 to the convertible-top control module and the vehicle wiring harness.
Connect the 88-pole connector of test adapter 9636 to test adapter 9616 . Lay pin template 9636 . on top of test adapter 9616 .