LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 619019 Removing And Installing Convertible-Top Compartment Lid (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, TARGA 4, TARGA 4S, TARGA 4 GTS, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Convertible-Top Compartment Lid

Installing Convertible-Top Compartment Lid

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check that none of the fastening clips are deformed or broken.

Replace missing or damaged clips with new clips.

Make sure that all fastening clips are engaged securely.

Make sure that all cables and hoses are engaged securely in the brackets.

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening nuts to Tightening torque 9.7 Nm (7.5 ftlb.)  .
scientia non olet · About LEMON Manuals