Removing Front Retaining Strip

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Front Rubber Seal With Rail Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove front retaining strip.
1. 1.1. Drill out rivets -3- on the convertible top covering -1- at the retaining strip -2- from inside.
  
  Fig 2: Identifying Rivets On Front Retaining Strip
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Unscrew fastening screws -4- .
  
  Fig 3: Removing Screws On Retaining Strip
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. 1.3. Remove retaining strip -2- .