LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 614119 Removing And Installing Microswitch For Rear Side Section Flap (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install module for flaps. → INSTALLING ADDITIONAL FLAP (MODULE)  .
  2. Install rear side section flaps. → INSTALLING ADDITIONAL FLAP  .
  3. Install wind deflector. → INSTALLING WIND DEFLECTOR .
  4. Perform a function test on the flaps.
    1. 4.1. Open and close the convertible top fully.
  5. Install trim panel for rear wall. → INSTALLING TRIM PANEL FOR REAR WALL .
scientia non olet · About LEMON Manuals