LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 614119 Removing And Installing Microswitch For Rear Side Section Flap (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove trim panel for rear wall. → 703119 REMOVING AND INSTALLING TRIM PANEL FOR REAR WALL .
  2. Remove wind deflector. → 684719 REMOVING AND INSTALLING WIND DEFLECTOR .
  3. Remove rear side section flaps. → 614219 REMOVING AND INSTALLING REAR SIDE SECTION FLAP .
  4. Remove module for flaps. → 619119 REMOVING AND INSTALLING ADDITIONAL FLAP (MODULE) .
scientia non olet · About LEMON Manuals