LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 612219 Removing And Installing Seal For Cowl Panel Frame (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Seal For Cowl Panel Frame >> Installing Seal For Cowl Panel Frame

Installing Seal For Cowl Panel Frame

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

  1. Fastening screw for seal for cowl panel frame. Tightening torque 5.6 Nm (4 ftlb.) 
  2. Installation is performed in reverse order to removal.
  3. Check that the door seal and cowl panel frame seal are joined correctly.
scientia non olet · About LEMON Manuals