Group 28 - Ignition, Engine Sensors
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Hall sender to cylinder head | Internal Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Knock sensor to crankcase | External Torx screw, M8 x 35 | Tightening torque | 23 Nm (17 ftlb.) | +/-2 Nm (+/-1.5 ftlb.) | |
| Ignition coil to cylinder head cover | Internal Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Ground cable for ignition coils to cylinder head cover | Cheese head bolt, M6 x 12 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Spark plug | Initial tightening | Tightening torque | 32 Nm (24 ftlb.) | +/-2 Nm (+/-1.5 ftlb.) | |
| Spark plug | Second tightening | Tightening torque | 25 Nm (19 ftlb.) | +3 Nm (+2 ftlb.) | |
| Oil-pressure sender to crankcase | Internal Torx screw, M6 x 20 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Oil-level sender to oil tank | Hexagon nut, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Control valve to oil guide module | External Torx screw, M6 x 16 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Pulse sender to transmission flange | Cheese head bolt, M6 x 16 | Tightening torque | 10 Nm (7.5 ftlb.) |