LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (13 - Engine - CRANKGEAR, Pistons -- 911 CARRERA (991)) >> WM 135955 Replacing Crankshaft Sealing Ring (Transmission Side) (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removing and installing flywheel
  • Leaks
  • Risk of damage to the flywheel and adjacent components

→ Be very careful during removal and installation.

→ Get another person to help because of the weight.

Manual transmission: 

  1. Install dual-mass flywheel.

    → INSTALLING FLYWHEEL  .

    Information 

    Loosen and tighten screws on the component according to specifications.

  2. Install the clutch.

    → INSTALLING CLUTCH .

  3. Install manual transmission.

    → INSTALLING TRANSMISSION .

    Porsche Doppelkupplung (PDK): 

  4. Install the flywheel.

    → INSTALLING FLYWHEEL  .

  5. Install transmission.

    → INSTALLING PORSCHE DOPPELKUPPLUNG (PDK) .