Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value	Tolerance 1
Cylindrical-roller bearing	Transmission	Temperature	120°C
Inner bearing ring	Transmission	Temperature	120°C
Inner bearing ring	Transmission	Temperature	120°C
Synchronizer ring installation dimension (new)		Nominal value	0.9 mm
Synchronizer ring wear		Nominal value	0.6 mm	+0.1 mm
Inner bearing ring	Transmission	Temperature	120°C
Inner bearing ring	Transmission	Temperature	120°C
Inner bearing ring	Transmission	Temperature	120°C
Cylindrical-roller bearing	Installation	Temperature	120°C
Nut on drive shaft		Tightening torque	250 Nm (185 ft. lb.)
Nuts securing tensioning plate to transmission housing		Tightening torque	25 Nm (19 ft. lb.)
Screws securing oil pipe to transmission housing		Tightening torque	6 Nm (4.5 ft. lb.)
Inner bearing ring	Transmission	Temperature	120°C
Synchronizer ring installation dimension (new)		nominal value	1.5 mm	+0.5 mm
Synchronizer ring wear		nominal value	1.2 mm
Inner bearing ring	Transmission	Temperature	120°C
Cylindrical-roller bearing	Installation	Temperature	120°C
Cylindrical-roller bearing	Installation	Temperature	120°C
Screw plug		Tightening torque	20 Nm (15 ft. lb.)
Screws for transmission housing		Tightening torque	23 Nm (17 ft. lb.)
Screw plug on transmission housing		Tightening torque	23 Nm (17 ft. lb.)
Inner bearing ring	Transmission	Temperature	120°C
Synchronizer ring installation dimension (new)		Nominal value	0.9 mm
Synchronizer ring wear		Nominal value	0.6 mm	+0.1 mm
Inner bearing ring	Transmission	Temperature	120°C
Screw on shift fork		Tightening torque	18 Nm (13 ft. lb.)
Output shaft nut		Tightening torque	300 Nm (222 ft. lb.)
Drive shaft nut		Tightening torque	200 Nm (148 ft. lb.)
Screws for transmission housing		Tightening torque	23 Nm (17 ft. lb.)