LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (34 - Mechanical Gear-Shift System - Actuation, Housing -- CARRERA (997)) >> WM 341219 Removing And Installing Shift And Selector Cables (Except Turbo) >> Removing Shift And Selector Cables >> Detaching Shift And Selector Cables At Transmission

Detaching Shift And Selector Cables At Transmission

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transmission support.
    Fig 1: Locating Transmission Support Mounting Bolts
    G09823688Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Use a screwdriver to prise off the shift cable -1-  and selector cable -2-  on the transmission external shift mechanism and unhook shift and selector cable from the support.
    Fig 2: Removing Shift And Selector Cables
    G09823689Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals