LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (10 - Engine - Crankcase, Suspension -- PANAMERA (970)) >> WM 103719 Removing And Installing Torque Support (PANAMERA, PANAMERA S, PANAMERA 4, PANAMERA 4S, PANAMERA Turbo, PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Preliminary work for upper torque support => 
    1. 1.1. Open the bonnet.
    2. 1.2. Remove right plenum panel cover. For details, see → 852219 REMOVING AND INSTALLING PLENUM PANEL COVER
      Fig 1: Unscrewing Fastening Screws
      G09804266Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Preliminary work for lower torque support => 
    1. 1.1. Remove front underbody panelling (engine guard). → 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
scientia non olet · About LEMON Manuals