| Transverse strut to body, top |
|
Tightening torque |
9.7 Nm (7.5 ftlb.) |
|
|
| Transverse strut to body, side |
|
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Support to lock carrier |
|
Tightening torque |
5 Nm (3.5 ftlb.) |
|
|
| Wing strut to lock carrier |
|
Tightening torque |
9.7 Nm (7.5 ftlb.) |
|
|
| Retaining strip to lock carrier |
Screw |
Tightening torque |
9.7 Nm (7.5 ftlb.) |
|
|
| Holder securing garage door opener control unit to lock support |
Internal Torx screw, M6 x 22 |
Tightening torque |
6 Nm (4.5 ftlb.) |
|
|
| Headlight mounting to body |
Hexagon socket head bolt, M6 x 30 |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Carrier to body |
|
Tightening torque |
55 Nm (41 ftlb.) |
|
|
| Screw-type clamps on intake and boost pressure lines |
|
Tightening torque |
5.5 Nm (4 ftlb.) |
|
|
| Refrigerant line holder to dual clip for refrigerant lines |
Tapping screw |
Tightening torque |
4.5 Nm (3.5 ftlb.) |
|
|
| Fastening screw securing coolant pipe to cylinder head |
M6 x 45, bottom/M6 x 12, top |
Tightening torque |
5 Nm (3.5 ftlb.) |
|
|