LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan Turbo >> Repair and Diagnosis >> Collision >> Body Panels >> 50 - Body Front - (95B) - MACAN >> WM 501855 Replacing Impact Absorber Mount >> Subsequent Work

Subsequent Work

  1. Release and remove vehicle from the straightening system.
  2. Clean joint areas and sheetmetal flanges with a wire brush.
  3. Prime joint areas and sheetmetal flanges with 2K primer.
  4. Restore standard seal using body sealant. → 5X00IN CORROSION PROTECTION MEASURES DURING REPAIR WORK

    Also seal the repair area carefully.

  5. Paint repair area and adjacent surfaces, if necessary.
  6. Restore standard underbody protection using underbody sealant. → 5X00IN UNDERBODY PROTECTION
  7. Apply standard cavity preservation. → 5X00IN CAVITY PRESERVATION Also carefully apply cavity preservation to the repair area.
  8. Install removed accessories in the repair area.
scientia non olet · About LEMON Manuals