LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (15 - Engine - Cylinder Head, Valve Control 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 157019 Removing And Installing Cylinder Head >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit deflector rail.

    > 154719 REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS 

  2. Install camshafts.

    > 150520 REMOVING AND INSTALLING CAMSHAFTS 

  3. Fit timing chain.

    > 153519 REMOVING AND INSTALLING TIMING CHAINS 

  4. Fit timing-case cover.

    > 153319 REMOVING AND INSTALLING TIMING-CASE COVER 

  5. Set the timing.

    > 150516 6 

  6. Fit the fuel distributor pipe.

    > 243019 REMOVING AND INSTALLING FUEL DISTRIBUTOR PIPE

  7. Fit intake-air distributor.

    > 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR

  8. Fit the turbocharger on V8 turbo engines.

    > 213019 REMOVING AND INSTALLING TURBOCHARGER

  9. Take the engine from the assembly support and connect it to the transmission.

    > Refer to 343527 Removing and mounting transmission in the appropriate service information. 

    or

    > WM 373427 REMOVING AND MOUNTING PORSCHE DOPPELKUPPLUNG (PDK) (EXCEPT PANAMERA S E-HYBRID, PANAMERA S HYBRID, PANAMERA EXECUTIVE, PANAMERA GTS, PANAMERA TURBO S,)

  10. Install the engine.

    > 100119 REMOVING END INSTALLING ENGINE