LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (15 - Engine - Cylinder Head, Valve Control 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 150520 Removing And Installing Camshafts >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Complete Steps 1 and 2 together. Set the timing before completing the final tightening of the camshaft controllers and sprockets. 

> 150516 SETTING TIMING FOR CAMSHAFTS 

  1. Install camshaft controllers for timing adjustment.

    > 158419 REMOVING AND INSTALLING ACTUATOR FOR CAMSHAFT (CAMSHAFT CONTROLLER) 

  2. Install camshaft timing gears for timing adjustment.

    > 150719 REMOVING AND INSTALLING CAMSHAFT TIMING GEAR 

  3. The high-pressure pump must be fitted after installing the intake camshaft for cylinder bank 5 to 8.

    > 246319 REMOVING AND INSTALLING HIGH-PRESSURE PUMP

  4. Install valve cover.

    > 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER