LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (15 - Engine - Cylinder Head, Valve Control 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 150520 Removing And Installing Camshafts >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove valve cover. Disassemble the cross panel to do this.

    > WM 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL) (EXCEPT PANAMERA EXECUTIVE, PANAMERA 4S SPORT EDITION, PANAMERA 4 EXECUTIVE)

    , then

    > 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER 

  2. Remove camshaft controller.

    > 158419 REMOVING AND INSTALLING ACTUATOR FOR CAMSHAFT (CAMSHAFT CONTROLLER) 

  3. Remove camshaft timing gears.

    > 150719 REMOVING AND INSTALLING CAMSHAFT TIMING GEAR 

  4. The high-pressure pump must be removed first before the intake camshaft for cylinder bank 5 to 8 can be removed.

    > 246319 REMOVING AND INSTALLING HIGH-PRESSURE PUMP

    The drive coupling of the high-pressure pump prevents the camshaft from being removed.

scientia non olet · About LEMON Manuals