Fuel Tank Filler Pipe: Installation
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
Install the fuel tank filler pipe and fasteners.
Torque: M6, 10 Nm
Install the nut.
Torque: M6, 10 Nm
Install the breather pipe.
Install the nut.
Torque: M6, 10 Nm
Reconnect the electrical connector.
Install the trim.
Install the filler cap.
Install the pipe and jubilee clip.
Install the clip.
Install the jubilee clip.
Install the wheel arch liner and fasteners.
Install the fastener.
Install the 6 fasteners.
Install the trim and 5 screws.
- Install the rear wheel.
Refer to: WHEEL AND TIRE .