LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 648 (47 Brakes- Brake Hydraulic System, Regulator, Booster -- (95B) MACAN) >> WM 477619 Removing And Installing Vacuum Pump (Except MACAN Sport Edition) >> Removing And Installing Vacuum Pump >> Installing Vacuum Pump

Installing Vacuum Pump

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace sealing rings.
  2. Align vacuum pump driver.
  3. Installation is performed in reverse order.

    Vacuum pump to engine: Tightening torque 9 Nm (6.5 ftlb.) 

scientia non olet · About LEMON Manuals