LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (10 - Engine - Crankcase, Suspension -- (95B) MACAN) >> WM 105519 Removing And Installing Oil Separator (MACAN Only) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit positive crankcase ventilation hose on the oil separator and screw in fastening screw. Tightening torque 4 Nm (3 ftlb.) Replace seals 
  2. Fit hose from solenoid valve for carbon canister and tighten hose clamp.
  3. Install ignition coils for cylinders 3 and 4. → 282020 REMOVING AND INSTALLING IGNITION COILS
scientia non olet · About LEMON Manuals