LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 625 (13 - Engine - CRANKGEAR, Pistons -- (95B) MACAN) >> WM, 137619A5 Removing And Installing Pulley (MACAN S) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The lock carrier must be moved to service position  for better access in the engine compartment at the front. WM 503809 LOOSENING AND SECURING LOCK CARRIER (SERVICE POSITION) .
  1. Remove engine cover (design cover).
  2. Remove air box for throttle housing. → WM 244219 REMOVING AND INSTALLING THROTTLE HOUSING (MACAN ONLY) .
  3. Remove drive belt. → 137819 REMOVING AND INSTALLING DRIVE BELT