Installing Flywheel

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The flywheel must not be tilted during removal and installation.

Install flywheel.
1. 1.1. Hold extractor Extractor T40176 at the top and counter at the bottom of the flywheel with your hand.
2. 1.2. Push flywheel onto the input shaft without tilting it.
Flywheel
Remove extractor Extractor T40176 from the flywheel.

Extractor