LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 623 (40 Front Wheel Suspension, Drive Shafts -- (95B) MACAN) >> WM 408537 Disassembling And Assembling Front Spring Strut (Except MACAN Sport Edition) >> Disassembling And Assembling Front Spring Strut >> Assembling front spring strut

Assembling front spring strut

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the coil spring is replaced: Always replace coil springs in pairs only!

NOTE:

During installation, make sure that the ends of the spring are touching the limit stops of the spring plate in the spring-strut mount (PASM)/mounting saddle (conventional) and in the lower concave support (permissible gap dimension: 2 mm).

  1. Installation is performed in reverse order.

    Observe specified tightening torques:

    Mounting saddle to piston rod (conventional):

    Spring-strut mount to piston rod (PASM):

scientia non olet · About LEMON Manuals