Removing front drive shaft
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- If used: Remove heat shield -1-
over the drive shaft.
Heat shield over drive shaft (component can differ from illustration)
- 1.1. Unscrew fastening screws -2- .
- Unscrew fastening screws for the drive shaft on the transmission.
Drive shaft mounting on transmission side
- Turn wheel bearing housing in until the drive shaft can be pulled out of the wheel bearing housing.
- Remove drive shaft.