LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 620 (37 Automatic Transmission - Actuator, Housing -- (95B) MACAN) >> WM 371319 Removing And Installing Locking Cable (Except MACAN Sport Edition) >> Subsequent Work >> Function test

Function test

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move selector lever from position "P" to "D" and from position "D" to "M" and back again several times.
  2. Check that the parking lock is disengaged.
    1. 2.1. Insert ignition key into the ignition lock.
    2. 2.2. Move selector lever to position "P". "P" appears in the instrument cluster.
    3. 2.3. Actuate the operating brake.
    4. 2.4. Start the engine.
    5. 2.5. Move selector lever to position "D". "D" appears in the instrument cluster.
    6. 2.6. Release the operating brake. If the vehicle moves forward, the test is complete. Otherwise, all connecting pieces must be checked again.
  3. Check that the parking lock is engaged (engine running).
    1. 3.1. Insert ignition key into the ignition lock.
    2. 3.2. Move selector lever to position "P". "P" appears in the instrument cluster.
    3. 3.3. Actuate the operating brake.
    4. 3.4. Start the engine.
    5. 3.5. Release the operating brake. The vehicle must not move. Otherwise, the entire system must be checked.
    6. 3.6. Switch off engine.
  4. Check that the parking lock is engaged (blocking effect).
    1. 4.1. Insert ignition key into the ignition lock.
    2. 4.2. Move selector lever to position "P". "P" appears in the instrument cluster.
    3. 4.3. Move selector lever to position "N". "N" appears in the instrument cluster.
    4. 4.4. Get another person to help you to push the vehicle for a distance of at least one meter. It must be possible to move the vehicle. Otherwise, the entire system must be checked.
    5. 4.5. Actuate the operating brake.
    6. 4.6. Move selector lever to position "P". "P" appears in the instrument cluster.
    7. 4.7. Get another person to help you to push the vehicle. The vehicle must not move (a max. movement of 150 mm is acceptable). Otherwise, the entire system must be checked.

95BAA1, 95BAB1, 95BAD1, 95BAF1, 95BAJ1, 95BAK1, 95BAS1, 95BAX1, 95BAY1, 95BAZ1

Model year as of 2014

C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C46, C96, C97, C98, C99

scientia non olet · About LEMON Manuals