LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 615 (2X Petrol, Exhaust, Engine-Electric - General -- (95B) MACAN) >> WM 2X00IN Battery Trickle Charging (Except MACAN GTS, MACAN Sport Edition) >> Battery Trickle Charging >> Information

Battery Trickle Charging: Information

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

→ "Workshop Equipment and Special Tools Manual" Battery chargers.

NOTE:
  • When working or carrying out tests on the vehicle or when the vehicle is in the workshop, a battery charger with a rated current of at least 40 A must be connected. 
  • As soon as the vehicle is unlocked, e.g. the vehicle is in the workshop or salesroom, it must be trickle charged with a battery charging device. 
NOTE: Using charging cables/jump leads directly on the vehicle battery.
  • Risk of damage to battery sensors.

→ Always connect charging cables/jump leads to the external power supply for jump-lead starting.

  1. Open protective cover on the positive terminal for jump-lead starting.
  2. First, connect the positive cable from the charger to the positive terminal.
  3. Connect the negative cable from the charger to the ground point for jump-lead starting.
  4. Read the operating instructions for the charger.
  5. Switch off all electrical loads.
  6. Switch on the charger.