Torque loss
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Necessary after:
- Re-programming DME control unit
- Replacing DME control unit
- Re-programming PDK control unit
Necessary before:
- Re-calibrating PDK
How?
Engine idling
- Preconditions:
- 1.1. Engine at operating temperature
- Engine idling for 3 minutes without activating loads, press accelerator pedal once after approx. 1.5 minutes during this time
- Engine idling for 3 minutes with air conditioning switched on, press accelerator pedal once after approx. 1.5 minutes during this time
- Engine idling for 3 minutes with air conditioning switched on and transmission range engaged, press accelerator pedal once after approx. 1.5 minutes during this time
- Switch off ignition (see also Information)
95BAA1, 95BAB1, 95BAD1, 95BAF1, 95BAJ1, 95BAK1, 95BAX1, 95BAZ1
Model year as of 2014, Model year up to 2020
C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C46, C96, C97, C98, C99