LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (74 Seat Cushions, Seat Covers -- (95B) MACAN) >> WM 745619 Removing And Installing Load-Through Provision (Except MACAN Sport Edition) >> Installing Load-Through Provision

Installing Load-Through Provision

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold left and right backrest forward.
  2. Position load-through provision -1-  on the mount on the left and right from above -arrows-  .
    G11982155

    Installing load-through provision 

  3. Position supporting bow -1-  over the mounts -arrows-  and tighten securely Tightening torque 12 Nm (9 ftlb.)  .

Information 

Always replace the fastening screws on the seat assembly after customer service and reworking. Micro-self-locking or self-tapping screws must not be modified, greased or loosened and then screwed in again.

G11982156

Screwing on supporting bow 

scientia non olet · About LEMON Manuals