LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (74 Seat Cushions, Seat Covers -- (95B) MACAN) >> WM 745519 Removing And Installing Armrest With Cover (Rear) (Except MACAN Sport Edition) >> Installing Armrest With Cover

Installing Armrest With Cover

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position armrest -1-  (-arrow-  ) so that the fastening screws -2-  can be fitted.
    G11982149

    Installing armrest with cover 

  2. Tighten fastening screws -2-  for the armrest Tightening torque 4.5 Nm (3 ftlb.)  .

    Information 

    • Replace fastening screws with new fastening screws before installation  .
    • Self-locking nuts and screws must always be replaced before installation  .
  3. Clip side trim covers -1-  into the load-through provision -2-  (-arrows-  ).
G11982150

Clipping in side trim covers 

scientia non olet · About LEMON Manuals